Notts Ogee Cast Iron Gutter

Hargreaves Notts Ogee Cast Iron Guttering is available in both Primed and Painted Finishes (Black only).

Sort By

product NO4501

115mm Notts Ogee Cast Iron Gutter x 1.83m

£111.89 inc VAT

£93.24 ex VAT

product NO4510

115mm Notts Ogee Cast Iron Gutter Angle 90dg External

£62.14 inc VAT

£51.78 ex VAT

product NO4511

115mm Notts Ogee Cast Iron Gutter Angle 90dg Internal

£62.14 inc VAT

£51.78 ex VAT

product NO4512

115mm Notts Ogee Cast Iron Gutter Angle 135dg External

£62.14 inc VAT

£51.78 ex VAT

product NO4513

115mm Notts Ogee Cast Iron Gutter Angle 135dg Internal

£62.14 inc VAT

£51.78 ex VAT

product NO4520B

115mm Notts Ogee Cast Iron Running Outlet

£62.14 inc VAT

£51.78 ex VAT

product NO4530

115mm Notts Ogee Cast Iron External Stopend Right Hand

£22.18 inc VAT

£18.48 ex VAT

product NO4531

115mm Notts Ogee Cast Iron Internal Stopend Left Hand

£22.18 inc VAT

£18.48 ex VAT

product NO4535

115mm Notts Ogee Cast Iron Union Clip

£25.96 inc VAT

£21.63 ex VAT

product NO4540

115mm Notts Ogee Cast Iron Fascia Bracket

£20.70 inc VAT

£17.25 ex VAT

product NO4541

115mm Notts Ogee Cast Iron Top Fix Rafter Bracket

£13.69 inc VAT

£11.41 ex VAT

product NO4542

115mm Notts Ogee Cast Iron Side Fix Rafter Bracket

£14.87 inc VAT

£12.39 ex VAT

Main Image

115mm Notts Ogee Cast Iron Rise & Fall Bracket

£18.19 inc VAT

£15.16 ex VAT

product HR0002

Low Modulus Sealquick Sealant (Notts Ogee Section)

£15.47 inc VAT

£12.89 ex VAT

product HR0001

M6 x 25mm Bolt Nut and Washer set (Notts Ogee Section)

£0.52 inc VAT

£0.43 ex VAT

How do I join my Notts Ogee Gutter ?

The most popular way of jointing cast iron gutters is by using a low modulus silicone sealant or specialist rubberised bitumen gutter mastic. The sealant should be spread evenly within the gutter socket applying additional sealant around the jointing hole before placing the gutter spigot into the socket andcompressing both parts using M6 x 25mm corrosion resistant mushroom head bolts, ensuring the bolt head is on the inside of the gutter. The washer and nut should be lightly tightened from the underside of the gutter to allow excess sealant to be removed. Do not over tighten as this could result in gutter damage.

Note: If gutters have been cut, remove any loose filings immediately to ensure no discolouration/ rust marks on the paint surface. Also check that cut ends, bolts, nuts and any slight installation damage is made good with the appropriate primer and paint.